The latest Multisizer 4e COULTER COUNTER from Beckman Coulter Life Sciences features a 10-micron aperture that enables users to obtain accurate count, size and mass distribution for particles and cells ranging from 0.2 to 1600 microns.
ROMACO North America’s KILIAN Synthesis 500 Bi-Layer Tablet Press is a versatile, state-of-the-...
Pharma Technology has developed an enhanced in-process...
Lake Shore Cryotronics’ 8500 Series THz system is suited for electronic, magnetic and chemical materials research and characterization.
INTERSCIENCE has released two additional models of its BagMixer 400 mL lab blenders range: BagMixer S and BagMixer SW.
The Hamilton Arc View Handheld allows measurement checks and the reading of measured values, as well as the configuration and calibration of sensors in the run-up to performing such measurements.
CONCOA’s 544 Series IntelliSwitch IIv gas distribution and management system, designed to routinely switch between two gas sources without interruption, offers reliable high-flow, high-pressure switching in the most demanding applications and environments.
Caron has released its latest generation of environmentally controlled stability chambers. The prodyct line includes: extra-large capacity Environmental Chambers (7000 Series) and Refrigerated Incubators (7001 Series) in two- (50 ft3) and three-door (75 ft3) configurations.
Bronkhorst High-Tech has expanded its IN-FLOWCTA series of mass flow meters/controllers with the introduction of the T23. It is a compact mass flow controller with a newly developed integrated, direct operating valve that can cope with high gas flow rates.
Wilks’ InfraCal 2 Analyzer for oil-in-water measurements offers additional features to the already established and used line of InfraCal TOG/TPH analyzers.
Designed to protect users during applications that emit vapors and/or chemical particles, the CaptairFlex fume hood line offers a level of performance that ensures safety while offering an environmentally friendly energy saving alternative to traditional systems.
EMD Millipore’s guava easyCyte 12 flow cytometry system provides a simple benchtop method for multicolor flow cytometry.
ELGA LabWater’s PURELAB Chorus range of laboratory water systems offers a high degree of usability and flexibility. The new products allow customers to assemble a truly bespoke system, fully optimized to best fit their application, budget and the configuration of their laboratory—all without compromising on water quality or the visual appeal of the unit.
Edwards has launched a special variant to its nXDS range of dry scroll vacuum pumps that is ideally suited for pumping rare or critical gases. nXDS dry scroll pumps are free of lubrication in the entire pumped path of the gas.
The SFT-150 Supercritical Fluid Extractor from Supercritcal Fluid Technologies was developed to investigate the application of supercritical fluid techniques to processing applications such as the extraction of peppermint flavor from peppermint leaves. The traditional peppermint extraction technique—steam distillation—produces a thermally degraded peppermint oil extract.
The MiniSeal II semi-automatic microplate sealer from Porvair Sciences comes complete with adapters, enabling it to process deep well, shallow well, low profile deep well, filter and assay plates that conform to the ANSI/SLAS standard format. The system’s plate adaptors not currently in use are designed to stack on top of the unit to keep them readily available.
PIKE Technologies’ Nano Stick is a precision UV-Vis product designed for quick and reproducible measurements of DNA, RNA and protein concentrations in biological samples. It fits in standard 1 cm cuvette holders of most commercial UV-Vis spectrophotometers.
Micromeritics’ AccuPyc II 1340 and GeoPyc 1360 Pycnometers can work in tandem to help optimize process design, manufacturing and drug product performance of pharmaceutical powders and solid dosage forms. This dual instrument approach combines true (absolute) and envelop (bulk) volume measurements to determine true density, total pore volume and percent porosity.
Porvair Sciences’ Chromatrap 96 HT is a high-throughput ChIP microplate based on the novel spin-column ChIP technology. It is essentially 96 separate Chromatrap spin-columns in one device, designed to enable researchers to perform up to 96 ChIP experiments in parallel.
Designed for the harsh environment of the production floor, the Metrohm’s NIRS Analyzer Pro is a true all-rounder. It features high-resolution diode array technology and provides non-destructive, qualitative and quantitative content analysis of granules, powders, slurries and opaque samples. Real-time measurements and simple operation ensure a consistent run of production closer to target specifications. Measurements of the complete wavelength range are done instantaneously and directly on the moving sample in the process stream. This allows for a highly accurate analysis of fast-moving samples.
The Metrohm Rancimat is so popular that the standard testing method goes by the name “Rancimat method.” The newest generation makes oxidative stability tests even more convenient as it enables the start of a determination at each of the instrument’s eight measuring positions with a simple touch of a button.
Key features of Metrohm’s CVS system are hardware flexibility and powerful software that provides ease-of-use and reliability of results. The entirely modular design gives users virtually unlimited configuration possibilities.
Kurt J. Lesker Co. has launched a Vacuum Pump Selection Guide on its website. The guide is a user-friendly tool that selects the proper vacuum pump for meeting one’s requirements from proprietary pump offerings.
JM Science’s AQUACOUNTER (AQV-2200S) full-featured Volumetric Karl Fischer Titrator is the ideal choice for working in a wide moisture range from 100 ppm to 100% water content with its maximum capability for automation and future upgrade options.
Hamilton Robotics’ Microlab NIMBUS384 is a compact, multi-channel liquid handler that offers fast liquid transfers, enhanced accuracy and precision pipetting. The 384 50-µL, air-displacement, multi-probe heads add even more flexibility by allowing users to pipette in 384, 96, quadrant, column, row and single-tip formats.
The FT4 Powder Rheometer from Freeman Technology is a universal powder tester—three instruments in one, combining the proprietary blade methodology for measuring flow energy with a range of shear cells, wall friction modules and other accessories for measuring bulk properties.
Fluid Metering’s 2014 Full Line Catalog contains new products as well as expanded flow and configuration information. The catalog details standard products, operating principles, pump capacities, drive characteristics, materials of construction, typical applications and ordering information.
Designed for effective, automated liquid handling applications, Eppendorf’s epMotion 5075 systems provide a precise, accurate alternative to time-consuming manual pipetting and liquid handling tasks. The combination of accelerated operational speed, new software and hardware features and an increased number of worktable positions makes the systems ideal for simple and flexible laboratory use across a range of liquid handling applications.
- Page 1