Dolomite’s Telos is an innovative system for high-throughput droplet, particle and flow product generation. It benefits a range of applications, including DNA, cell and bead encapsulation and screening, emulsion and foam generation, microparticle and nanoparticle synthesis, and micro-reaction engineering.
VistaLab Technologies’ Ovation M line of manual pipettes combine the ergonomic performance of...
TandD Corp.’s Wireless RTR-601 handheld thermometer and core temperature recorder is designed to...
Porvair Sciences has developed silicone cap mats for its range of 2-mL-deep well storage blocks. Incorporating a double O-ring feature, the silicone cap mats ensure a tight liquid-proof seal every time.
Omega Engineering’s RTDM12 series of compact RTD temperature sensors is extremely rugged with a molded (IP67) 4-pin connector with M12 male thread and a fast response time.
Molex’s FlexiBend MPO/MTP flexible-boot cable assemblies are designed to optimize cable routing and support low-profile installations where cabinet doors or front panels might interfere with traditional straight style, bend-limiting boots.
Widely used in the manufacture of disposable medical devices, Master Bond LED403Med is a single component system that passes the plastics test for USP Class VI and ISO 10993-5 cytotoxicity requirements.
JM Science’s Smart Caps technology protects the health of laboratory personnel when using waste solvents. Smart Healthy caps are in response to modern laboratory safety regulations.
Goodfellow has announced the availability of two variants of zinc foam: 99.99% zinc deposited on a polyurethane foam and ZAMAK 410 Zn /Al4/Cu1/Mg0.04 zinc alloy foam with solid ligaments.
Eppendorf’s Serological Pipets for cell culture applications feature clear material and sharp graduation for easy read-out. They work in complete harmony with the company’s pipette controller, the Easypet 3.
Brady Corp. has added a high-visibility safety mat to its SPC line of products. This highly absorbent safety mat is for all-purpose industrial applications, and its yellow caution color and printed message visually warn workers of potential risks.
The Purair SKY ceiling-mounted filtration units from Air Science are designed to protect laboratory personnel and the environment in areas where hazardous substances are handled.
The INFICON Gemini Inverted Magnetron Vacuum Gauge combines two sensor systems into one small device so it can measure from atmosphere to 1 x 10-9 mbar.
Lake Shore Cryotronics has published a comprehensive catalog featuring its full selection of magnetic measurement solutions for manufacturing and research environments.
General Tools & Instruments has published its 2014 full-line tools and instruments catalog, which is available in traditional print format, digital format and can also be viewed on the company’s website. Featuring more than 1,300 items, the 292-page, full-color glossy catalog presents the company’s complete product line.
The Combipack from Porvair Sciences is suited for laboratories tasked with protein precipitation sample preparation. Comprising five color-coded proprietary P3 protein precipitation plates and five 1-mL-deep well collection plates, the kit contains all the elements required to accelerate the traditionally troublesome procedure.
Value Plastics has developed a cost-efficient needle-free swabable valve series featuring higher flow rates, low priming volumes and a straight-through design for unobstructed flow. Designed for the injection and aspiration of fluids, particularly for IV applications, urology, blood processing, cardiology, pharma and disposable biopharm, the hermetic septum seal reduces the risk of biofilm formation and contamination in an industry where infection is of particular concern.
Qosina has added five new Control Stroke Syringes to its portfolio. These syringes help ensure volume regulation during fluid delivery, and are used for precise injection or withdrawal. All syringes are equipped with a dimple inside the barrel opposite the graduation, which acts as a plunger stop.
Building on the success of its Chemcap ductless fume cabinets, Bigneat has introduced a new sash door model with emphasis on operator comfort and safety.
Titan Enterprises’ 800 Series flow meters incorporate a range of developments, further enhancing long-term, high-performance operation for OEM customers in drink dispensing, laboratory testing, cooling, pharmaceutical, medical and semiconductor applications.
The product portfolio of Huber Kältemaschinenbau comprises temperature control hoses with smooth internal walls, which improve flow characteristics and thermal transfer.
Micronic has extended its blue-white Tracxer Code Reader line with the Tracxer Code Reader RD235 CRYO. It offers a high-end solution for scanning whole racks with 2-D data matrix or TraXis-coded tubes.
Festo’s mini-H gantry EXCM is a desktop handling system suited for medical laboratory automation. The planer surface gantry system is fast, accurate, modular and flexible. It is also plug-and-play for quick and easy start up.
BrandTech Scientific’s inertGrade microplates are suited for the cultivation of non-adherent cell lines, spheroids and stem cells in a 96-well plate format.
AMSBIO’s 384-well Alvetex Scaffold cell culture plates provide biopharmaceutical companies with a tool to improve predictive accuracy, productivity and biological relevance of their cell-based high-throughput testing.
TandD’s TR-72wf-H contains an integrated Wi-Fi function that enables it to automatically upload recorded data from the logger to the company’s free cloud-based WebStorage service.
Molex’s HOZOX Electromagnetic Interference (EMI) Absorption Tape and Sheets use a unique dual-layer design to maximize the EMI noise mitigation performance.
Lab M has made its comprehensive Product Guide available as a digital flip book or PDF download, as well as offering printed versions for those who prefer to access a hard copy in the laboratory.
- Page 1