EMD Millipore’s AFS 40E, 80E, 120E and 150E water purification systems have been developed to provide clinical laboratories with an economical and reliable water purification solution for daily water volumes of up to 3000 L. The systems rely on two powerful technologies to produce water quality, meeting the Clinical and Laboratory Standards Institute (CLSI) Clinical Laboratory Reagent Water standards.
The MB3600-CH80 PET Bottle Analyzer is a rugged industrial FT/NIR spectrometer for fast quality analysis of PET bottles and preforms. It is intended for R&D centers, QA/QC laboratories or production lines of companies that perform a large number of daily measurements for determination of key characteristics of PET preforms or blown bottles.
Omega Engineering’s TCL-10 series is simple to operate, and keeps sample at a low temperature for long periods. Cooling causes no mess or contamination.
Torrey Pines Scientific’s EchoTherm Model HP61A Programmable Hot Plate has a 12 x 12” milled-flat cast aluminum heater top. Applications include wafer processing and annealing, polymer engineering, baking photo resists, wax and glue heating and bonding, micro fabrication and encapsulation, surface mount soldering and heating any sample directly on the heater surface.
The 120 pumps in Watson-Marlow Pumps’ new peristaltic pump range are suited for single-use systems where no contamination can be accepted. The pumps have been developed to increase the low-flow capabilities of the company’s product range for applications in the biopharm sector.
The Dr. Ehrenstorfer product line from LGC Standards includes a comprehensive line of compounds to be used in testing food and/or environmental samples for chemical residues. The need for testing the food we eat and the water we drink has greatly increased, along with the use of pharmaceuticals used to manage both human and animal health.
Separation Methods Technologies offers chromatographers enhanced specialty columns and bulk packing materials for various separation chemistries ranging from analytical to process scale. Its O (C8) and OD (C18) columns can tolerate aggressive pH conditions (1-12), and are stable at extended temperatures (25 to 90 C).
Clark Solutions’ Boxer 5100 Diaphragm Pumps are designed for the pumping and/or transfer of gases. The high-performance OEM pumps can be configured for serial or parallel operation to deliver smooth, level flow, often eliminating the need for dampening components.
UCT is continuing its expansion into the analytical HPLC column market with the release of the Selectra Aqueous C18 phase. This phase offers the benefits of a traditional C18 and conforms to USP L1.
The Thermo Scientific Q Exactive Focus LC-MS/MS is designed to make the qualitative and quantitative power of Orbitrap-based instruments available to customers who use Q-TOF mass spectrometry or other technologies. The system combines high-performance quadrupole precursor ion selection with a high-resolution accurate-mass (HRAM) Orbitrap mass analyzer, providing enhanced mass accuracy, sensitivity and fast polarity switching.
Thermo Fisher Scientific’s Vanquish UHPLC system was designed from the ground up to provide enhanced levels of performance, productivity and usability when used as a standalone system or with mass spectrometers. It looks different from standard UHPLC systems, and there are benefits to its clean design.
Shimadzu Scientific Instruments’ Nexera-e Comprehensive Two-Dimensional Liquid Chromatograph (2-D-LC) offers a powerful separation method for the most complex sample matrices. The system provides an enhanced level of knowledge and understanding of sample analytes, which is beneficial to scientists analyzing pharmaceutical impurities, proteins, lipids, peptides, food extracts and natural products.
Precision X-Ray’s X-RAD SmART is an advanced small animal image-guided radiation therapy (IGRT) system that combines high-accuracy imaging with a high X-ray dose rate in a single platform. The system enables researchers to image, plan and treat without repositioning the specimen.
COMSOL’s COMSOL Server was developed specifically for running applications built with the Application Builder. The Builder allows Multiphysics software users to build an intuitive interface around their model that can be run by anyone—even those without prior simulation experience.
Malvern’s OMNISEC platform integrates highly efficient sample separation via the OMNISEC RESOLVE module and high sensitivity analysis using OMNISEC REVEAL, a fully integrated multi-detector array. The system has applications wherever there is a need for detailed analysis and understanding of natural or synthetic polymers, proteins and macromolecules.
Cell biology and screening scientists and technicians can now be free to monitor and control their automated incubators from virtually any location outside the laboratory where Wi-Fi is available. The Thermo Scientific Cymon remote monitoring application essentially replicates the next-generation display of the Cytomat 10 Automated Incubator on a Samsung 10.1” touchscreen tablet, which can be operated remotely.
SEAL Analytical’s SEAL AQ400 discrete analyzer was designed to meet the needs of environmental laboratories of all types using colorimetric analysis. Based on a high standard of reliability and low detection limits, the discrete analyzer is a true walkaway solution.
LabAnswer is a vendor-independent consultancy providing laboratory informatics services, including assessments, vendor/product selections, architecture/design, configuration/customization, system/instrument integration, validation, training, data load/migration, organizational change management, deployment and support outsourcing of data systems.
Nordson EFD’s PRO series of automated fluid dispensing systems combine precise dispensing with fast and easy programming, and are easily integrated into any manufacturing operation. These closed-loop systems ensure that the dispensing process stays in control.
Tangent Membranes has developed a small, extremely powerful reverse osmosis filter that requires only 110 V to operate up 1000 psi. It takes up approximately a 12”-ft2, and is a turnkey system. Designed for ease-of-use, it can also be fitted with MF, UF and NF membranes.
Independent Air Treatment Technology’s AiroGen Onsite Laboratory Gas Generators offer a safe, easy-to-use, economical and efficient technology for high purity H2, N2 and zero air analytical grade laboratory gases on demand—without the need for gas cylinders.
Bellingham + Stanley offers a number of Certified Reference Materials that may be used to verify almost any make of refractometer or polarimeter. All CRMs are manufactured to the highest standards and are certified in accordance with EN ISO/ IEC 17025:2005; with traceability to ICUMSA and NIST or PTB depending on the CRM type.
Labconco’s RXPert Filtered Balance Systems are Class I biological safety cabinets, meeting requirements for non-sterile powders and particulates contained during hazardous drug manipulation. These true bag-in/bag-out HEPA-filtered powder hoods include a canopy and damper for thimble ducting the enclosure to the outside.
JM Science offers a wide selection of atomic absorption lamps (AA Lamps) for spectroscopy instrumentation. The lamps are priced for budget-conscience labs where AA spectroscopy instrumentation is used.
JM Science offers a selection of deuterium lamps (D2 Lamps) for atomic absorption, ultraviolet visible spectrophotometer and HPLC instrumentation. The deuterium lamp has a low-pressure, gas discharge light source often used in spectroscopy when a continuous spectrum in the UV region is needed.
KNF Neuberger’s enhanced SIMDOS 10 line of diaphragm liquid metering pumps is available with four head material options. The line affords laboratory personnel with simple operation, thanks to a user-friendly display and adjustable transfer parameters from a touch-control knob.
FLIR Systems’ GF343 is an optical gas imaging camera that allows users to detect and visualize carbon dioxide (CO2) leaks quickly, easily and from a safe distance. Whether the CO2 emission is a byproduct of a production process, a trace gas used to detect leaks from power generators or as part of an Enhanced Oil Recovery program, fast and accurate detection of CO2 leaks is key to keeping operations running safely, efficiently and profitably.
FLIR Systems’ Muon is specifically for volume OEMs capable of integrating uncooled FPAs into their own camera solutions. The company has simplified the OEM process by offering a thermal subassembly that generates calibrated CMOS video out, using industry-standard interfaces.
Carl Zeiss’s Smartzoom 5 is a smart digital microscope that’s ideal for quality assurance applications in virtually every field of industry. Quick and easy to setup, fully automated and equipped with dedicated quality assurance and quality control components, it’s so simple to operate, even untrained users can produce excellent results.
Brooks Life Science’s SampleStore II SE is an extension of its SampleStore II automated storage solutions portfolio that can manage a wide range of consumable types. The system enables laboratories to efficiently manage small to mid-size sample collections comprising a range of tubes, vials and plates with a single automated storage solution.
Compatible with the complete Micronic range of 96-format tubes and racks as well as other brands, the Univo Manual Capper CM480 is designed to seal an entire rack of tubes with push caps in a single action. Compact and robust in design, the capper can repeatedly and reliably secure cap tubes (up to 1.40 mL) in all ANSI/SLAS format racks up to a maximum height of 48 mm.
Tecan’s Fluent Laboratory Automation Solution is designed to offer greater throughput and flexibility for compound management workflows. This application-oriented system introduces a number of new hardware and software options that simplify and improve the productivity of compound management and assay plate generation activities.
Researchers are often required to perform bioassays that involve a great deal of pipetting. Much of this work needs to be performed under a biological safety hood, which requires the user to pipet using tedious arm positions and motions.
Shimadzu Scientific’s UV-1280 multipurpose UV/Vis spectrophotometer offers wavelength scanning from 190 to 1,100 nm. This compact, high-quality instrument is ideal for applications in a variety of industries, including environmental, food quality and life science.
Ocean Optics’ Flame spectrometer delivers high thermal stability and low unit-to-unit variation without compromising the flexibility and configurability of the modular, miniature spectrometer. Features such as interchangeable slits, indicator LEDs and simpler device connectors provide enhanced flexibility for a range of UV-Vis applications in chemistry, physics, biology, materials science, earth science and chemical engineering.
KROHNE’s SpectroBAY process near-infrared (NIR) spectrometer system is for process control in the chemical industry. Improving chemical plant reliability and profitability through automated control, the system is suited for a range of applications, including fluids, gases and suspensions in conjunction with optical sensors.
KNF Neuberger’s RC 900 Rotary Evaporator is designed to simplify rotary evaporation and enhance safety in the lab. It provides lab personnel with a unique combination of high-performance functionality and a simplified user experience—all from an instrument that remains whisper-quiet and requires minimal space on the lab bench. The evaporator provides lab personnel with streamlined rotary evaporation via a multitude of operational enhancements.
Quantachrome Instruments’ NOVAtouch surface area and pore size analyzer features a touch-sensitive, multi-functional color screen. The gas sorption analyzer provides fast, precise and reliable data collection and analysis of solid particles.
The ACP multi-stage Roots pump from adixen by Pfeiffer Vacuum are suitable for all vacuum applications where extreme cleanliness of the vacuum process is required. A special feature of the pump is that the pump system is composed of non-wearing parts.