Advertisement
Filters And Filtration, Water Purification

Filtration Media for Life Sciences and Diagnostics

February 17, 2015 5:51 pm | I.W. Tremont Co., Inc. | Product Releases | Comments

With sample sizes reducing and increased need for higher resolution indication, IW Tremont’s Grade D-23 delivers marked performance increase in whole blood separation. This media has been developed in concert with a leading CRO as an IVD component, platform for research trials and pharmaceutical drug development projects.

LISTED UNDER: Filters And Filtration, Water Purification

Small, But Powerful, Reverse Osmosis Filter

February 17, 2015 5:29 pm | Product Releases | Comments

Tangent Membranes has developed a small, extremely powerful reverse osmosis filter that requires only 110 V to operate up 1000 psi. It takes up approximately a 12”-ft2, and is a turnkey system. Designed for ease-of-use, it can also be fitted with MF, UF and NF membranes.

LISTED UNDER: Reverse Osmosis

Pharma Solvent Gets an Upgrade

January 5, 2015 12:16 pm | Restek Corporation | Product Releases | Comments

To keep up with the demands of pharmaceutical QC labs performing residual solvent analysis, Restek has released an updated Class 2 Mix A reference standard. This standard has been reformulated to include cumene, which was added to the USP Class 2 list in August 2013, and allows labs to successfully detect and quantify solvent residues in compliance with the latest USP <467> guidelines.

LISTED UNDER: Solvent
Advertisement

Ultrasonic Devices Check, Clean Clogged Manifold Tubes

December 24, 2014 7:00 am | Product Releases | Comments

BioTek’s 405 family of microplate washers benefits from the use of two ultrasonic devices to check for and clean clogged manifold tubes. Verify and Ultrasonic Advantage help prevent potential assay failure and equipment downtime commonly caused by blockages in the small diameter tubes of a microplate washer.

LISTED UNDER: Manifolds

Filtration Unit Accelerates Process

September 5, 2014 10:14 am | EMD Millipore Corp. | Product Releases | Comments

EMD Millipore’s EZ-Fit Filtration Unit, a ready-to-use, disposable filtration device for bioburden testing, is more efficient than traditional methods, resulting in increased reliability and streamlined workflows.

LISTED UNDER: Filtration Apparatus

Publication Guides Moisture Work in Plastics

September 5, 2014 10:12 am | Mettler Toledo | Product Releases | Comments

To assist those who work with plastics, both in the laboratory and along the production line, METTLER TOLEDO has created a guide on moisture and water content determination in plastics. The Moisture Guide for Plastics presents the different methods of moisture and water content determination: loss of weight, chemical reaction, thermogravimetric, spectroscopic and other types of analysis.

LISTED UNDER: Plastic

PCR Plastics for Low-profile Thermal Cyclers

September 5, 2014 10:03 am | BrandTech Scientific | Product Releases | Comments

BrandTech Scientific’s high-quality PCR plastics are suited for standard and low-profile thermal cyclers.

LISTED UNDER: Plastic

Droplet Merging at the nL Scale

August 6, 2014 10:20 am | Product Releases | Comments

Dolomite’s Mitos Dropix Droplet Merging System meets the needs of microfluidic applications that benefit from the ability to combine pairs of droplets in a controlled manner. The system creates a droplet sequence and merges successive pairs of droplets using a microfluidic Droplet Pillar Merger Chip.

LISTED UNDER: Fluid
Advertisement

Purification Systems Provide Point-of-use Water

June 10, 2014 9:48 am | Labconco Corporation | Product Releases | Comments

Labconco’s WaterPro Systems include both reverse osmosis systems and polishing stations. The WaterPro PS delivers Type I, 18.2 megohm-cm water at a rate of 1.8 L/min depending on feedwater flow rate and pressure, as well as the installed purification modules.

LISTED UNDER: Water Purification

Customizable Pump Optimizes Flow Rates

June 6, 2014 11:26 am | IDEX Health & Science, LLC | Product Releases | Comments

IDEX’s Ismatec Reglo ICC (independent channel control) offers instrument manufacturers a panel-mount configuration that can be customized with 2, 3, or 4 fully addressable channels. Boasting accuracy and precision with a re-engineered, long-life drive mechanism and available Windows-based software controls, the panel-mount OEM is ideal for bioreactors, or any instrument containing more than one peristaltic pump.

LISTED UNDER: Fluid

Direct-Pure UP Ultrapure & RO Lab Water Systems

May 16, 2014 3:51 am | RephiLe Bioscience, Ltd. | Products

The Direct-Pure UP Ultrapure & RO Lab Water System is an integrated system that produces ultrapure and reverse osmosis (RO) water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

LISTED UNDER: Reverse Osmosis | Ultrafiltration

System Suited for High-throughput Droplet Microfluidics

April 4, 2014 4:00 pm | Product Releases | Comments

Dolomite’s Telos is an innovative system for high-throughput droplet, particle and flow product generation. It benefits a range of applications, including DNA, cell and bead encapsulation and screening, emulsion and foam generation, microparticle and nanoparticle synthesis, and micro-reaction engineering.

LISTED UNDER: Fluid

Ceiling-mounted Filtration Units Ensure Universal Protection

April 4, 2014 2:54 pm | Product Releases | Comments

The Purair SKY ceiling-mounted filtration units from Air Science are designed to protect laboratory personnel and the environment in areas where hazardous substances are handled. 

LISTED UNDER: Filtration Apparatus

Universal Testers Allow Better Control, Precision

April 4, 2014 11:55 am | Shimadzu Scientific Instruments | Product Releases | Comments

Shimadzu Scientific Instruments has introduced four universal testers that offer high-level control, tight precision and intuitive operation for a variety of material testing.

LISTED UNDER: Testers

Deduster, Tester System is Three-in-one

March 7, 2014 2:10 pm | Product Releases | Comments

Pharma Technology has developed an enhanced in-process tablet tester for its AIO Tablet Deduster and Tester System. Short for “all in one,” the deduster and tester system builds upon the company’s PharmaFlex family of dedusters by offering turnkey peripheral devices as integrated solutions. 

LISTED UNDER: Testers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading