E-mail for more information

Company's other products

E-mail to a colleague

See similar products

Printer friendly format

Safe Removal of Inflammable Solvents

The EZ-2 Inert Purge unit works by controlling the flow of nitrogen from a cylinder to the evaporation chamber and is interlocked with the EZ-2 operating system. Flooding the chamber with nitrogen before evaporation begins removes explosion risk. A run can only commence when the chamber has been purged to a pre-set over pressure, which is automatically detected by the unit. If this pressure is not reached, for example because the lid has not sealed properly or the drain valve has been left open, the system fails safe and will not allow evaporation to begin. In addition, the unit has an easy to read regulator indicating cylinder gas pressure and an interlock, which prevents purge commencing if the cylinder pressure is too low. A secure key switch allows managers to dictate that Purge must be used at all times if this is deemed necessary.
Genevac Ltd
Farthing Road
Ipswich