 
 E-mail
for more information
Company's
other products
E-mail
to a colleague
See
similar products
Printer
friendly format
|
|
Oxygen/Nitrogen/Hydrogen Analyzer
To address the needs of laboratories measuring a variety of samples, especially new materials, as well as steel and metals, the EMGA 620W/SP is the combination of an O/N analyzer and an H analyzer using the same extraction furnace, balance, and computer system. Software controls all operating and analysis modes for O/N/H analysis. The combination of these modules provides accurate measurements as all extracted gases are analyzed by standard conventional methods. O is determined using an infrared detector while N and H are measured using thermal conductivity detectors (TCD). The gas flow is also innovative, as both helium and argon gas can be selected, and constant purge flow is applied during measurement with the other carrier gas. Finally, the EMGA 620W/SP benefits from the feature of current models for the determination of ideal measurement conditions using the multi-step programmable temperature curve and double sample and flux introduction mechanism.
Jobin Yvon, Inc.
3880 Park Ave.
Edison, NJ, 08820
|
