Scienceware Poly-Hand pumps are made entirely of polyethylene to resist corrosion, strong acids, alkalis and many solvents. The pump does not pressurize the vessel. Instead, it delivers fluids by positive pressure on the down stroke of the large loop handle that fits a gloved hand.
The Traceable Kangaroo thermometer carries the 42 inches probe cable in a reel compartment pouch inside the unit’s case. This carry-around, portable thermometer fits in a shirt pocket, or users can use the built-in stand with a bench footprint of 4.5 sq in.
Models 4127 and 4227 Traceable refrigerator/freezer thermometers monitor temperatures in freezers, water baths, heating blocks, incubators and refrigerators with an enclosed temperature-buffered sensor.
Edge-blackened optics are designed to increase contrast and reduce noise in imaging and electro-optical systems. The blackened edges prevent light from exiting a mounted optic, reflecting off the metal fixturing and being reimaged through the optical assembly.
AlumaSeal CS adhesive aluminum foil film is formulated with an adhesive that withstands long-term storage at -80 C. Aluminum foils have superior barrier properties to retard evaporation. These films have a single, non-perforated end tab and are easy to apply. Dimensions measure 82.6 mm × 132.
Low profile flasks feature the CellBIND surface that creates 100 cm2 of surface area, enabling users to realize a 50% space savings when using low-profile flasks compared to standard T75 flasks.
The vacuum-rated LFV Series MIV is a two-way, normally closed, chemically inert solenoid valve suited for fluidic circuits that will see both positive and negative pressures, such as pump inlet/outlet valves.
The EZ-ZONE PM controller extends the integrated control loop functions first introduced in the EZ-ZONE ST controller to the 1/32nd and 1/16th DIN panel mount package sizes. It offers solutions to reduce system complexity and to lower the cost of control loop ownership.
The Cheminert C52 series injector is an integrated motor/valve assembly designed specifically to be built into an OEM system. Utilizing the HPLC injector design and the 24-volt motor from proprietary microelectric actuators, the injector needs only to be connected to the instrument’s power supply.
The TPS40-series of high density, enclosed, switching power supplies provides an output power of 40-watts. All models accept universal input from 85 to 264 VAC and are available with single, dual or triple outputs. Compact packaging measures only 5.0× 3.9× 1.6.
The redesigned XL-80 laser calibration system allows a 4× faster slew rate and 10× higher dynamic data capture rate in a smaller, lighter and more portable package. The system increases linear measurement speed to 4 m/sec while providing a resolution of 1 nm.
The wet-wet differential pressure sensor, Model DP86, reduces measurement error in fluid flow for both low pressure gas and corrosive liquid measurement.
The optimal service management program helps users maximize the performance of all their calibration service processes. The program addresses needs in account management, assurance of supply, regulatory compliance, total cost of ownership, innovative programs and customer logical.
Targeted protein quantitation in complex matrices can now be achieved routinely by performing high-throughput highly selective reaction monitoring (H-SRM) analyses using the TSQ Quantum Ultra triple quadrupole mass spectrometer.
The MEL-1 and MEL-2 hES cell lines have been tested with HEScGRO media for human embryonic stem cell culture.